KTEK secures order from major Israeli aerospace manufacturer
Released
Released
Announcement PDF
KTEK Aerosystems ASX Release Page 1 of 4
ASX RELEASE ASX: KTK
21 September 2026
KTEK secures US$200,000 initial order of a US$994,100
work package from major Israeli defence aerospace
manufacturer
Highlights
● KTEK has received a binding PO for US$200,000 which is the first milestone of a
US$994,100 quoted work package from a major Israel-based aircraft manufacturer
and defence prime contractor.
● The scope covers the design and development of a specified airframe component.
● The project is the first stage of a broader program with an estimated potential of up to
US$5M for design engineering work packages only. Following successful delivery this
may position KTEK for airframe manufacture and supply.
● The project places KTEK at the front end of a customer journey that may progress
through design approvals, test support and, subject to successful delivery and
separate orders, prototype manufacturing and serial production and ongoing
component supply.
KTEK Aerosystems Ltd (ASX: KTK) (KTEK or the Company), a specialist in the design,
engineering and manufacture of advanced composite structures and electromechanical sub-
assemblies for aerospace and unmanned systems applications, is pleased to announce that
it has received a binding US$200,000 initial purchase order from a major Israel-based aircraft
manufacturer and defence prime contractor with a significant international footprint (the
Customer), which is the first milestone of a US$994,100 work package. Due to the sensitive
nature of the program, we are unable to disclose the Customer’s identity.
Under the purchase order, KTEK will undertake the design, analysis, documentation and
engineering support required for the development of the airframe component. The initial
project represents KTEK's first engagement with the Customer. It provides an opportunity to
demonstrate the Company's design, engineering, program-management and manufacturing
capabilities within a large aviation program.
Material terms and scope
● Customer: is a large Israeli aerospace and defence group with over 10,000 employees
and multi-billion-dollar annual revenues. The total work package value, US$994,100,
has been quoted by the Company. The initial US$200,000 purchase order is binding
and allows KTEK to commence work. The balance of the quoted work package will
only become binding if and when additional purchase orders are issued by the
Customer.
● Total work package comprises US$591,400 for design, US$201,300 for
documentation and US$201,400 for production and testing support.
● Scope: airframe design and structural analysis of a defined airframe component.
● Key deliverables: drawings, stress reports, bills of materials.
● Performance period: a planned 30-month program from receipt of order, subject to the
timely provision of customer inputs and approvals.
● Payment milestones:
KTEK Aerosystems ASX Release Page 2 of 4
○ preliminary design US$200,000 - expected to be completed in 3 months
○ engineering and development - US$592,700 expected to be completed in 18
months from receipt of order and requires the receipt of an additional order.
○ manufacturing support for additional year - US$201,400.
Manufacturing and prototype are not included scope and if required, will be
contracted via further purchase orders and or agreements.
● Further work: It is estimated based on Company discussions and historic minimums
needed to justify relationships with suppliers for the size of the Customer, that the
broader program represents an opportunity of around US$5M for design engineering
work packages. There is no contracted guarantee that KTEK will receive further work
from the Customer beyond the work package announced today.
KTEK expects revenue from the purchase order to be recognised progressively as the agreed
work and customer-approved milestones are completed over the planned 30-month program.
Customer journey and growth catalysts
The initial purchase order is material to KTEK at its current stage of development. Its broader
strategic importance is that it places KTEK at the front end of a potential customer journey
with a major aviation manufacturer and prime contractor whose programs have international
reach.
This is a clear example of KTEK's staged business model. The Company seeks to enter
aerospace and defence programs during design and development, apply its engineering and
industrialisation capabilities, and earn the opportunity to participate in later stages of the
program.
Subject to successful performance, customer approvals and separate purchase orders or
agreements, the potential pathway and associated growth catalysts are:
● requirements definition and approval, including the system requirements review
(SRR);
● preliminary and critical design reviews (PDR and CDR), delivery and customer
approval drawings, reports, bills of materials;
● production-readiness review and preparation of the manufacturing package;
● potential follow-on orders for prototype manufacturing and serial production and an
ongoing share of airframe component supply requirements.
The current purchase order is limited to the scope and value described above. It does not
guarantee that any later stage will proceed, or that KTEK will receive serial-production orders
or minimum future revenue. Each stage will depend on KTEK's performance, the Customer's
approvals and program requirements, and the negotiation of further commercial terms.
Customer confidentiality
The Customer has required its identity to remain confidential because of defence and security
restrictions applying to the program.
The Customer is a major established aviation manufacturer and defence prime contractor
based in Israel, with a significant international footprint. The agreed program requires the
Customer to approve each major engineering milestone and all inputs needed for KTEK to
perform the work.
The Company confirms that:
KTEK Aerosystems ASX Release Page 3 of 4
● it does not consider the identity of the Customer (beyond the description provided in
this announcement) to be information that a reasonable person would expect to have
a material effect on the price or value of KTEK’s securities; and
● this announcement contains all material information relevant to assessing the impact
of the purchase order on the price or value of KTEK’s securities and is not misleading
by omission.
Dekel Keisar, Founder and Managing Director, KTEK Aerosystems, said:
“This initial order is an important step for KTEK. It gives us the opportunity to work with a major
aviation prime and demonstrate the design, engineering and manufacturing capabilities we
can bring to a complex aircraft program.”
“This is a strong illustration of our business model. As each design, production-readiness
milestone is achieved, KTEK can compete to expand its role into subsequent airframe
component supply.”
Next steps
KTEK will now mobilise its engineering team, receive the required technical inputs from the
Customer and progress the system requirements review, the first formal approval milestone.
The Company will update the market if the program results in material follow-on orders or
other material developments.
This announcement has been authorised for release by the Board of KTEK Aerosystems Ltd.
E N D S
For further information, please contact:
Media Contact
David Tasker
Chapter One Advisors
M: +61 433 112 936
E: dtasker@chapteroneadvisors.com.au
About KTEK Aerosystems
KTEK Aerosystems (ASX: KTK) is a specialist in the design, engineering and manufacture of
advanced composite structures and electromechanical sub-assemblies for aerospace and
unmanned systems applications. The Company supplies structural and functional components
that are integrated into larger platforms developed by third-party defence and commercial
Companies.
KTEK delivers:
● build-to-spec composite airframes and structural components, including fuselage
structures, wings and control surfaces;
● full-turnkey design-to-build sub-assemblies;
● electromechanical assemblies and rugged defence systems;
● systems integration and kitting; and
● SATCOM components and sub-assemblies for mobile defence and commercial
platforms.
KTEK Aerosystems ASX Release Page 4 of 4
KTEK operates a scalable, asset-light “Cordless Factory” model. It retains engineering design,
structural analysis, program management and quality assurance in-house while using a
certified international manufacturing partner network. This structure is designed to support
production scaling without the capital intensity of a traditional Tier-1 aerospace manufacturer.
The Company is led by Founder and Managing Director Dekel Keisar, a mechanical engineer
and former Head of UAV Structural Engineering at Israel Aerospace Industries, with
experience across more than 20 military UAV platforms.
Website: https://ktek.tech/
Share your feedback
Discover